For USA customers try this pre-filled shopping cart at Aloft. This gives you the majority of the adhesives, carbon, lead and electrics in one order.
Racing Sparrow Ranger Materials & Parts
These are the complete and detailed lists of materials and electronics you need to complete the build of the Racing Sparrow Ranger 695.
Select Your Region
Aloft pre-filled cart
General Supplies
- Masking Tape alofthobbies.com
- (CA Glue) Superglue 20g alofthobbies.com
Hull
- Filament PLA+ 1 Roll 3dfuel.com
- Split pins (25mm x 3.5) x 2 nautos-usa.com
- Brass Tube 1/8 alofthobbies.com
Electrics
- Radio Transmitter radiomasterrc.com
- Radio Receiver radiomasterrc.com
- Standard Sail Servo alofthobbies.com
- Rudder Servo Emax ES3054 alofthobbies.com
- Rudder Control Rod & Clevis alofthobbies.com, alofthobbies.com
- Power Switch On/Off alofthobbies.com
- Small 3mm screws x 2 alofthobbies.com
- Battery 4AA Holder amazon.com
Keel/Rudder
- Carbon Rod Round 4mm - (50mm length) alofthobbies.com
- Carbon Rod Round 3mm - 250mm length alofthobbies.com
- Carbon Square Rod 4mm - 345mm lengths x 4 alofthobbies.com
- Epoxy Resin 150ml alofthobbies.com
- Methylated Spirits amazon.com, amazon.com
- Lead Shot 540g/1.19lbs (Larger bulb) alofthobbies.com
- Keel Rope 2mm x 150mm nautos-usa.com
Rigging & Sails
- Carbon Mast 6mm x 4mm-inner - 1000mm length alofthobbies.com
- Carbon Boom 5mm - 360mm length alofthobbies.com
- Braid Line - 1 meter jannsnetcraft.com
- Sail Material 883 x 347mm rectangle (A rig) kitesandfunthings.com
- Spinnaker Repair Tape - half roll nautos-usa.com
- Fishing Clip & Swivel jannsnetcraft.com
Notes
Batteries
For best performance, use a 4×AAA square battery pack or a lightweight LiPo. These options help reduce overall boat weight, improving handling and responsiveness.
The battery compartment is sized to fit a standard 4×AA square pack, giving you flexibility in battery choice. If you choose a smaller battery, use packing foam to fill the space and ensure the battery sits securely without movement.
Servos
The servos listed on this page are recommended options, but many alternatives will work just as well.
The servo tray is designed around the dimensions of these suggested models, so when selecting your own servos, check their size and aim for similar measurements to ensure a good fit.
The file set also includes a servo tray STEP file, allowing you to customise a tray to suit your specific servos if you have CAD experience.
Check out the full build guide which incorporates this video inside the build instructions.