For UK customers try this pre-filled shopping cart at PJ Sails. This gives you the majority of the adhesives, sail materials and electrics in one order. They also have many other useful materials so take a look about their website.
Racing Sparrow Ranger Materials & Parts
These are the complete and detailed lists of materials and electronics you need to complete the build of the Racing Sparrow Ranger 695.
Select Your Region
PJ Sails pre-filled cart
General Supplies
- Masking Tape wheelspinmodels.co.uk
- (CA Glue) Superglue 20g wheelspinmodels.co.uk
Hull
- Filament PLA+ 1 Roll esun3dstore.uk
- Split pins (25mm x 3.5) x 2 pjsails.co.uk
- Brass Tube 1/8 pjsails.co.uk
Electrics
- Radio Transmitter flyingtech.co.uk
- Radio Receiver flyingtech.co.uk
- Standard Sail Servo pjsails.co.uk, wheelspinmodels.co.uk
- Rudder Servo Emax ES3054 pjsails.co.uk, wheelspinmodels.co.uk
- Rudder Control Rod & Clevis wheelspinmodels.co.uk - Link, wheelspinmodels.co.uk - Rod
- Power Switch On/Off wheelspinmodels.co.uk
- Small 3mm screws x 2 pjsails.co.uk
- Battery 4AA Holder wheelspinmodels.co.uk
Keel/Rudder
- Carbon Rod Round 4mm - (50mm length) easycomposites.co.uk
- Carbon Rod Round 3mm - 250mm length easycomposites.co.uk
- Carbon Square Rod 4mm - 345mm lengths x 4 easycomposites.co.uk
- Epoxy Resin 150ml easycomposites.co.uk - slow cure
- Methylated Spirits amazon.co.uk
- Lead Shot 540g/1.19lbs (Larger bulb) claygame.co.uk - #7.5
- Keel Rope 2mm x 150mm spearfishing.co.uk
Rigging & Sails
- Carbon Mast 6mm x 4mm-inner - 1000mm length easycomposites.co.uk
- Carbon Boom 5mm - 360mm length easycomposites.co.uk
- Braid Line - 1 meter pjsails.co.uk
- Sail Material 883 x 347mm rectangle (A rig) pottersolutions.co.uk, pjsails.co.uk, sailsetc2.com
- Spinnaker Repair Tape - half roll pjsails.co.uk
- Fishing Clip & Swivel pjsails.co.uk - Clip, pjsails.co.uk - swivel
Notes
Batteries
For best performance, use a 4×AAA square battery pack or a lightweight LiPo. These options help reduce overall boat weight, improving handling and responsiveness.
The battery compartment is sized to fit a standard 4×AA square pack, giving you flexibility in battery choice. If you choose a smaller battery, use packing foam to fill the space and ensure the battery sits securely without movement.
Servos
The servos listed on this page are recommended options, but many alternatives will work just as well.
The servo tray is designed around the dimensions of these suggested models, so when selecting your own servos, check their size and aim for similar measurements to ensure a good fit.
The file set also includes a servo tray STEP file, allowing you to customise a tray to suit your specific servos if you have CAD experience.
Check out the full build guide which incorporates this video inside the build instructions.