Racing Sparrow RG65-3D Materials & Parts
These are the complete and detailed lists of materials and electronics you need to complete the build of the Racing Sparrow RG65 3D.
Select Your Region
General Supplies
- Masking Tape bunnings.com.au
- (CA Glue) Superglue 20g hobbytools.com.au, bunnings.com.au
Hull
- Filament PLA+ 1 Roll cubictech.com.au
- Split pins (25mm x 3.5) - Standard 5, Una 2 boltandnut.com.au
- Brass Tube 1/8 radiosailingshop.com.au
Electrics
- Radio Transmitter phaserfpv.com.au
- Radio Receiver phaserfpv.com.au
- Standard Sail Servo radiosailingshop.com.au, ebay.com.au
- Rudder Servo Emax ES3054 phaserfpv.com.au
- Rudder Control Rod & Clevis radiosailingshop.com.au
- Battery 4AA Holder radiosailingshop.com.au
- Power Switch On/Off radiosailingshop.com.au
- Small 3mm screws x 2 radiosailingshop.com.au
Keel/Rudder
- Carbon Rod Round 3mm - 300mm length enhancedcomposites.com.au
- Carbon Square Rod 4mm - 350mm lengths x 4 enhancedcomposites.com.au
- Epoxy Resin 150ml theboatwarehouse.com.au, theboatwarehouse.com.au
- Methylated Spirits bunnings.com.au
- Lead Shot 550g /(19.4 oz) minimum g3ddesigns.com.au
- Tiller Arm Bolt – M2 x 12mm Bolt & Nut radiosailingshop.com.au - Bolt, radiosailingshop.com.au - Nut
Rigging & Sails
- Carbon Mast 6mm x 4mm-inner - 1000mm length enhancedcomposites.com.au
- Carbon Boom 5mm - 450mm length enhancedcomposites.com.au
- Sail Material radiosailingshop.com.au
- Spinnaker Repair Tape - half roll radiosailingshop.com.au, theboatwarehouse.com.au
- Braid Line - 1 meter bunnings.com.au, radiosailingshop.com.au
- Fishing Clip & Swivel bunnings.com.au
Parts List – Standard Rig Only
- Stay Wire radiosailingshop.com.au
- Stay Crimps radiosailingshop.com.au
Parts List – Una Rig Only
- Ripstop Nylon amazon.com
Optional Parts List
- 3mm Stainless Rod × 100mm – Rudder (optional), can use carbon rod radiosailingshop.com.au
- Control rod & clevis radiosailingshop.com.au
- DB608 Kwik Grip Rudder Arm Connector radiosailingshop.com.au
Notes
Batteries
For best performance, use a 4×AAA square battery pack or a lightweight LiPo. These options help reduce overall boat weight, improving handling and responsiveness.
The battery compartment is sized to fit a standard 4×AA square pack, giving you flexibility in battery choice. If you choose a smaller battery, use packing foam to fill the space and ensure the battery sits securely without movement.
Servos
The servos listed on this page are recommended options, but many alternatives will work just as well.
The servo tray is designed around the dimensions of these suggested models, so when selecting your own servos, check their size and aim for similar measurements to ensure a good fit.
