Racing Sparrow Model Yacht RC Sailboat Plans
Check out these plans and resources, ranging from a 375mm boat to a 1500mm yacht. Pair these with our eBook guide for a fast, easy, and affordable home build RC yacht.
RS-RG65 - 650mm plans, measures to international RG65 rules
A full forward hull and a straight stern. This boat has proven to be a very fast and competitive racer.
RacingSparrow RG65 v2
Racing Sparrow 3D 760
A 3D printable version that is 760mm. STL files are available in the 3D printing section.
Racing Sparrow 3D 1000
A 3D printable version that is 1000mm. STL files are available in the 3D printing section.
Racing Sparrow 1000 plans
A one metre version, scaled up lines. Bulkhead only plans. Look at the 750 for full schematics.
RS 1000
Racing Sparrow 1500 plans - A scaled up Racing Sparrow
A larger size model yacht. I haven't seen many of these surface. It's a good challenge to build.
RS 1500
Racing Sparrow 375 plans - The smallest sparrow
A miniature RacingSparrow. A great introduction to building with balsa.
RS 375
RacingSparrow Footy plans
A double diagonal design footy from RacingSparrow.
Footy Sparrow - experimental v1
Logos & Sticker Sheet
Downloadable logos and an EPS file to be sent to a printer and printed out on navy blue cutout vinyl.
Vinyl sticker sheet RS Logo colour RS Logo blue
Free Book Sample - PDF
A few pages from the eBook absolutely free. Download from the Builders Book page.
Print Your Own Radio Controlled Yacht
Want to 3D Print a RacingSparrow? Well now you can. We offer a set of STL files and instructions.
We have been hard at work designing the original Racing Sparrow to be 3D printable.
It is so easy to print and build and sails really well. We are really happy with how it turned out.
Common questions about the plans
What tools do I need to build a RacingSparrow?
1. Chisel
2. Craft-knife
3. Drill Bit - 2mm (5/64in)bit
4. Drill Bit - 5mm (3/16in) bit
5. Electric Drill
6. Felt Marker
7. File
8. Hacksaw
9. Hammer
10. Hole Punch
11. Lighter
12. Pen
13. Pencil
14. Pins
15. Pliers
16. Ruler (steel)
17. Sanding Block
18. Scissors
19. Screwdriver
20. Spirit Level (optional)
21. Sponge Brush (several)
22. Vice Grips
Do I need the eBook to build this cool rc sailboat?
No you don't. The book is designed for the newcomer to model yacht building. The book does make it a much simpler process with every detail figured out and covered in the book. Seasoned builders can simply have a go with the free plans.
Are the plans really free?
Yes all the plans are free to download and use as you see fit. The most comprehensive plans are the RS750 A1 full size.
Are there CAD files or 3D files?
Yes there is a 3D printable version of the racing sparrow. Read the page about that model.
Builders eBook
Dive into the world of boat building with our eBook. Discover the craft of hull planking, fibreglass strengthening, and lead keel ballast casting.
Master the art of electrics installation, spray painting, sail making, and tuning of sails. Download a sample today and embark on a rewarding journey of boat construction.
What the builders and sailors say:
Being a complete novice, I purchased your book a couple of years ago and built two racing sparrows. Building on this experience I then went on to build, from scratch, an IOM (Triple Crown design).
I've since joined a local club and sail virtually every weekend. I would just like to thank you for your endeavours which have allowed me to enter a world I never thought was in my reach.
Coming upon your book, "Build your own Radio Controlled Yacht" in the Napier Public Library, I am hugely impressed.
The combination of your superb photos and illustrations with your easy writing style make it a standout publication and I hope it does well for you.
Thanks for an excellent design in your RG65. I trialled her again today in a solid 20 knots gusting higher. Even so in a steep chop and fingers off the rudder she drove upwind remarkably well, balanced perfectly.
Very impressed that a model boat can handle that with a large rig. I found the book excellent. Ive built several big boats, plus a few skiffs and without that resource building such a good boat would have been impossible.
Build It Yourself - Racing Sparrow
- PDF download
- Detailed plans
- Clear illustrations and photos
- Lists all tools & materials
- Shows centimeters & inches
Look at all these cool boats folk have made at home
There is also a full gallery with a boat load of photos of Racing Sparrow's
Budi Santoso, Indonesia
2019年4月4日
Mel Kitson's 750, Watford UK
2013年6月5日
Hi, Bryn, I enjoyed the build immensely. There were areas where I had some uncertainties, some of which were assisted through the forum posts, and some of which I improvised. All in all I am truly delighted with the end result and now look forward to learning to sail and enjoying many happy hours "playing".
Kind regards, Mel Kitson
Kevins stunning RG65, New Zealand
2013年4月1日
Hi all, Just finished an RG65 racing Sparrow. (I made an 80% size one a while ago, it's in the gallery).
Standard hull with 1 layer of 50g glass and epoxy. Deck is 1.5mm balsa with veneer strips on top. Single hatch with rubber seals and 3 hold down screws.as I fitted the rudder servo into the recessed rear deck. Corona servos DS339HV digital for the sails and CS939 analogue for the rudder, I fitted a greased cork gasket under the rudder servo arm to waterproof the servo. Battery is a 2S 1000mAh lipo with a regulator for the Rx and rudder servo. Radio is Flysky CT6B. laminated ply fin with 2 layers of 50g glass, rudder from balsa with 1 layer of glass. Ballast and fin is 680g. Mast is slightly taller at 1050 so the sails are slightly different to fit within the 2250cm max. All up weight is 1150g.
I'll get sailing pix very soon.
Alan Brown Catamaran Racing Sparrow derivitive, Perth, Western Australia
2020年7月23日
Jerry Cashman's RS750, Canberra, Australia
2022年11月26日
Hello! Here a couple of pix of my Sparrow. She’s been finished for a year or so now but the lockdowns has kept her out of the water largely.
She’s a beaut. Sails beautifully on just the lightest air. Thanks for the design!
Sparrow I found on the net, looks like an rs1500, Internet
2010年2月2日
Mike Wilson's - RS1000 moulded hull and deck, Gold Coast, Australia
2013年11月15日
P2 - The successor of the first 3D printed RacingSparrow, Nelson, New Zealand
2024年8月29日
Bryn's Second 3D printed yacht.
Jonathon Gillham, New Zealand
2018年10月11日
Graham Long, Auckland, New Zealand
2009年12月17日
